Honeywell Universal Rectangular Zone Dampers Page IV

USE THIS LINK FOR A BETTER SCREEN PRESENTATION OF THIS PAGE.

Honeywell Round Retrofit Zone Dampers The RRD is a round, low voltage damper that is easily inserted into rigid round ducts for retrofit zoning in forced air heating and cooling systems. The damper is used with Honeywell EMM3, EMM3U, TZ4, W8835 and similar zone control systems. The power open, power closed actuator draws 2.5 VA allowing multiple dampers per zone, but delivers high torque for reliable operation. * Gaskets around blade and under motor housing provide low internal leakage and very low external leakage
Part Number	Diameter(In.)	Price ea.
RRD5	5	$79.11
RRD6	6	$81.09
RRD7	7	$83.07
RRD8	8	$85.02

Fresh Air Economy Ventilation Units Provides fresh air from the outside into a home. The control operates a fresh air intake damper and , when necessary, activates the main HVAC blower to efficiently meet ASHRAE ventilation rates.
HONW8150A1001	50 to 160 cfm. Includes W8150A Fresh Air Ventilation Control, mounting hardware, homeowner information label Used with EARD6; ER200B; ER200C; ER150C; ER150B; HR200B; HR150B	$102.90 $79.25
HONY8150A1009	50 to 160 cfm. Includes W8150A Fresh Air Ventilation Control, EARD6 normally closed 6 inch damper, AT120B 120 Vac/24Vac 20VA transformer, mounting hardware for control, homeowner information label	$188.18 $150.08
EARD6	normally closed 6 inch damper, Round, Top or Side, Power closed, spring open, reversible, blade closes off tightly against gasket for minimal leakage. Includes motor M847D	$133.67
TROM847D1012	The M847D is a two position, 24 Vac spring return actuator designed to operate ARD, EARD and ZD zone dampers. Direct replacement for M847D1004 RDMH RDMA RDMZ.	$88.86 ea.

Floating, SPDT Actuators 35 lb-in, Non-Spring Return , 24 Vac ±20%, 50 Hz, 60 Hz. Used to control dampers in applications such as variable air volume (VAV) terminal units and for mounting on ball valves; suitable for use with SPDT or floating thermostats or building automation controls. Buy 3 or more and receive 3% discount.
HONML6161A2009	REPLACES ML6161A1001	$62.97 ea.
HONML6161A2025	REPLACES ML6161A1027.	$62.97 ea.
HONML6161B2024	REPLACEMENT MOTOR FOR MARD DAMPERS.	$56.70 ea.
HONML6161B2032	7 MINUTE TIMING--REPLACES ML6161B1018.	$56.70 ea.
HONML6161B2073	HOFFMAN # 201-7BR-DA	$56.70 ea.

HONM8405A1006	24 Vac Modulating Spring return-foot mounted motor25 lb-in. spring return damper actuators provide two-position, three-position, floating, or modulating control of economizer systems, ventilation dampers and combustion air dampers used in residential or commercial HVAC equipment.	$173.41 ea.

HONM9484E1009	24 Vac Modutrol IV Motor with 75 lb-in torque rating. Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replace M941A,C,D motors.	$561.31 ea.
HONM9184D1021	24V Non-Spring Return Foot Mounted Actuator with 150 lb-in. torque. Series 90 Modutrol™ IV Motors are non-spring return modulating proportional control motors used with controllers that provide a Series 90 output to operate dampers or valves.	$551.82 ea.
HON220736A	Internal Auxiliary Switch Assembly 1 SPDT AUX SWITCH FOR MOD IV MOTORS.	$71.91 ea.

HONML4195C1009	120V DIRECT-COUPLED SPRING RETURN DAMPER ACTUATOR 142 LB-IN TORQUE 90 SEC TIMING ON/OFF SPST CONTROL SIGNAL INCLUDES 2 AUX SWITCHES. Obsolete but still available. Replacement is MS4120A1209 SYS7 or S20120-2POS-SW2	$561.31 ea.


Showing 78 - 82 of 94 items. HOME	<< back 1 2 3 [4] 5 >>