 Honeywell® products |
 HEPA Portable Powered filter |
 Honeywell® Chronotherm III Thermostats |
 Honeywell® Chronotherm IV Thermostats |
 Honeywell® & Skuttle® Humidifiers |
 Reznor® Unit Heaters |
|
 | ||||||
²
²
²
²
²
² The Test–All acid test kit consists of three bottles–two neutralizer and one indicator solution. The neutralizer solutions are labeled for specific oils. The solutions in the kit are stable, but are sensitive to light and heat.
² Circulates quickly throughout the system and chemically neutralizes acids that are left in an air conditioning or refrigeration system after a burnout occurs.
² Circulates quickly throughout the system and chemically neutralizes acids that are left in an air conditioning or refrigeration system after a burnout occurs.
² Circulates quickly throughout the system and chemically neutralizes acids that are left in an air conditioning or refrigeration system after a burnout occurs.
² Rx-Acid Scavenger™ provides a better, more convenient way to neutralize or scavenge acid in refrigeration, air conditioning systems... after burnouts or during normal on-going systems maintenance. Normal dosage rate is 2 fl. oz. of Rx-Acid Scavenger™ for 1 gallon of system oil. Acid Scavenger™ is formulated for use with all lubricants... mineral, alkylbenzene, and polyol ester. Use after system burnout to scavenge acid products in the system, or change a system with Rx-Acid Scavenger™ to neutralize acid conditions should they develop.
² The Safe-T-Switch® Models SS1 detects down stream clogs in condensate drains and interrupt the thermostat circuit to shut off the unit before flooding occurs. This product can also be installed to activate an alarm circuit. The Model SS1 installs inline at any downward slope from vertical to horizontal. It can also be installed on auxiliary pan outlets utilizing the plug included with the kit. Float resets automatically and won't stick in the OFF position after the drain is cleared, saving callbacks.
* Safe-T-Switch® is UL Listed to comply with most applicable building codes
² The Safe-T-Switch® Models SS2 detects down stream clogs in condensate drains and interrupt the thermostat circuit to shut off the unit before flooding occurs. This product can also be installed to activate an alarm circuit. Model SS2 installs primarily in drain pan outlets but can be used inline with the addition of a 3/4" tee. Float resets automatically and won't stick in the OFF position after the drain is cleared, saving callbacks.
* Safe-T-Switch® is UL Listed to comply with most applicable building codes
² A solid state control designed to help prevent flooding, damage to carpets, walls, furniture, ceilings, etc. Turns system off when detecting moisture due to condensate or drain leaks. As few as one or two drops will cause a wet switch to turn off a unit or sound alarm. Easily reset. Can be also be used with the 
²
² Protects air conditioning coil from freezing due to low airflow or excessive bypass air. Breaks Y circuit to compressor below 36°F and remakes it at
46°F
