|
|
|
Call toll free 1-866-584-0355 or 1-903-759-2160 fax: 903-759-4605
309 Patriot Circle, Longview, TX 75604-2240
 |
| |
|
| |
| DIRECT VENT WALL FURNACES |
 ¹
Empire's® Compact Direct Vent Millivolt DV Series |
Clean and cost-efficient comfort makes these the perfect heaters to add soothing
atmospheric warmth to your smaller-size rooms. The slim, compact design of each unit allows it to tuck out of the
way on any outside wall. The com lete line of Empire direct vent wall furnaces is specifically designed for placement
in areas where flues or chimneys are not available or cannot be used. One hole through the outside wall is all you
need. Plus, Empire direct vent heaters have removable front panels for cleaning and servicing. With a direct vent
system, there is a positive difference in fuel economy because outside air is used to support combustion. The air
on the inside is warmed as it recirculates around a sealed chamber. This warm air comfortably heats the room cleanly
and efficiently. Empire’s secret to quieter operation is our uniquely designed burner. As gas enters the burner port,
it is ignited immediately, which eliminates delayed ignition noise and gives you quieter operation.
Safety is the key factor to every Empire direct vent furnace. Each unit contains an automatic shut-off valve should the
pilot light become extinguished. And, Empire’s factory-based quality control procedures assure you that every heater is
a top performer before it goes into your home.
* Quiet burners, a matchless piezo ignition and all the safety features you expect from Empire Comfort
* Total warmth for a fraction of the cost of electric heat
* No electricity needed for millivolt wall thermostat operation
* Optional automatic blower available for more even heat distribution
* Cost-efficient installation
* All Empire products shown have a 10 year warranty on the combustion chamber, 1 year limited warranty on parts.
Venting
Wall thickness: 4 1/2" to 13" (19" with vent tube extension kit); 3/4" to 10" for DVC35, 4 1/2" to 12" for MV Series (18"
with extension kit)
Vent opening:
DV210, 215: 6 1/4"; DV25, 35, DV55, DVC35: 7 1/2"; MV120: 5 1/2"; MV130: 6 3/4"; MV145: 8 1/2"
Combustibles clearance: Top DV210, 215: 12"; DV25, 35: 48"; DV55, DVC35: 4"; MV Series: 36" Side DV210, 215: 1"; DV25,
35 - 6"; DV55, DVC35: 4" (18" for side outlet); MV Series: 4"
| | |
| INDOOR, DIRECT VENT, GAS, Compact, Millivolt |
| |
Output |
Dimensions (In.) |
|
| Part # |
(BTUH) |
W |
D |
H |
Price |
| DV210SG-LP |
10,000 |
16 1/4 |
9 3/8 |
21 3/8 |
$503.91 |
| DV210SG-NAT
|
10,000 |
16 1/4 |
9 3/8 |
21 3/8 |
$503.91 |
| DV215SG-LP
|
15,000 |
20 1/4 |
9 3/8 |
24 7/8 |
$564.84 |
| DV215SG-NAT
|
15,000 |
20 1/4 |
9 3/8 |
24 7/8 |
$564.84 |
| |
| Accessories |
| DVB-1 |
Optional Blower Assembly |
$127.04 |
| DV-822 |
Vinyl Siding Vent Kit |
$52.80 |
| TRW |
Wireless Remote Thermostat |
$125.63 |
| |
| Download the
Manual and Parts List (.pdf file). |
|
|
|
| |
| |
 ¹
Empire's® Direct-Vent furnace is stylishly crafted
and fits against an outside wall.
|
The perfect heaters to add soothing atmospheric warmth to your smaller-size rooms. The
slim, compact design of each unit allows it to tuck out of the way on any outside wall. The complete line of Empire direct
vent wall furnaces is specifically designed for placement in areas where flues or chimneys are not available or cannot be
used. One hole through the outside wall is all you need. Plus, Empire direct vent heaters have removable front panels for
cleaning and servicing. With a direct vent system, there is a positive difference in fuel economy because outside air is
used to support combustion. Safety is the key factor to every Empire direct vent furnace. Each unit contains an automatic
shut-off valve should the pilot light become extinguished.
* No electricity needed for millivolt wall thermostat operation |
| |
| INDOOR, DIRECT VENT, GAS, SPARK IGNITION |
| |
Output |
Dimensions (In.) |
|
| Part # |
(BTUH) |
W |
D |
H |
Price |
| DV25SG-NAT |
25,000 |
37 |
11-1/2 |
27-3/4 |
$698.88 |
| DV25SG-LP |
25,000 |
37 |
11 1/2 |
27 3/4 |
$698.88 |
| DV35SG-NAT |
35,000 |
37 |
11 1/2 |
27 3/4 |
$758.37 |
| DV35SG-LP |
35,000 |
37 |
11 1/2 |
27 3/4 |
$758.37 |
| |
| Accessories |
| DRB-1 |
Automatic Blower |
$137.26 |
| DV-822 |
Vinyl Siding Vent Kit |
$52.80 |
| TRW |
Wireless Remote Thermostat |
$125.63 |
| |
| Download the
Manual and Parts List (.pdf file). |
|
|
|
| |
| |
 ¹
Empire's® Counterflow Direct-Vent Wall Furnaces |
Clean and cost-efficient comfort makes these the perfect heaters to add soothing
atmospheric warmth to your smaller-size rooms. The slim, compact design of each unit allows it to tuck out of the
way on any outside wall. The complete line of Empire direct vent wall furnaces is specifically designed for placement
in areas where flues or chimneys are not available or cannot be used. One hole through the outside wall is all you
need. Plus, Empire direct vent heaters have removable front panels for cleaning and servicing. With a direct vent
system, there is a positive difference in fuel economy because outside air is used to support combustion. The air
on the inside is warmed as it recirculates around a sealed chamber. This warm air comfortably heats the room
cleanly and efficiently. Empire&s secret to quieter operation is our uniquely designed burner. As gas enters
the burner port, it is ignited immediately, which eliminates delayed ignition noise and gives you quieter operation.
Safety is the key factor to every Empire direct vent furnace. Each unit contains an automatic shut-off valve should
the pilot light become extinguished. And, Empire’s factory-based quality control procedures assure you that every
heater is a top performer before it goes into your home. Quiet burners, a matchless piezo ignition and all the safety
features you expect from Empire Comfort
* Total warmth for a fraction of the cost of electric heat
* No electricity needed for millivolt wall thermostat operation
* Optional automatic blower available for more even heat distribution
* Cost-efficient installation
All Empire products shown have a 10 year warranty on the combustion chamber, 1 year limited warranty on parts.
Venting
Wall thickness: 4 1/2" to 13" (19" with vent tube extension kit); 3/4" to 10" for DVC35, 4 1/2" to 12" for MV Series (18"
with extension kit)
Vent opening: DV210, 215: 6 1/4"; DV25, 35, DV55, DVC35: 7 1/2"; MV120: 5 1/2"; MV130: 6 3/4"; MV145: 8 1/2"
Combustibles clearance: Top DV210, 215: 12"; DV25, 35: 48"; DV55, DVC35: 4"; MV Series: 36" Side DV210, 215: 1";
DV25, 35 - 6"; DV55, DVC35: 4" (18" for side outlet); MV Series: 4"
Applications for both models outside wall. In addition, the DVC35 may be recessed 9 1/2" between studs and the DV55 4".
|
| |
| COUNTERFLOW INDOOR, DIRECT VENT, GAS |
| |
Output |
Dimensions (In.) |
|
| Part # |
(BTUH) |
W |
D |
H |
Price |
| DV55SPP-NAT |
55,000 |
16 |
11 5/16 |
82 3/8 |
$1130.39 |
| DV55SPP-LP |
55,000 |
16 |
11 5/16 |
82 3/8 |
$1130.39 |
| DV55IP-NAT |
55,000 |
16 |
11 5/16 |
82 3/8 |
$1353.32 |
| DV55IP-LP |
55,000 |
16 |
11 5/16 |
82 3/8 |
$1353.32 |
| DVC35SPP-NAT |
35,000 |
14 1/8 |
10 3/8 |
72 1/2 |
$979.87 |
| DVC35SPP-LP |
35,000 |
14 1/8 |
10 3/8 |
72 1/2 |
$979.87 |
| |
| Download DV55SPP
Manual and Parts List (.pdf file). |
| Download DV55IP
Manual and Parts List (.pdf file). |
| |
| Models DV55IP-NAT & DV55IP-LP are Electronic Ignition |
|
|
|
¹ Pictures of Products © United Refrigeration, Inc. ©2007 All rights reserved. |
| |
| Item 1-14 of 30 Items |
[1]
2
Home
|
If you have comments or suggestions, please email me at
James' A/C Co.
|
|
|
|
